| PART |
Description |
Maker |
| HH-1174-10 |
The HH-1174-10 is designed to be used with high frequency switching power supplies
|
JMK Inc.
|
| TC1029EUA TC1029 TC1029EOA TC1029EPA |
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from ...
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from a single supply, however, operation from dual supplies is also possible, and the power supply current drai
Linear Building Block - Dual Low Power Op Amp
|
MICROCHIP[Microchip Technology]
|
| S1T2410B01 S1T2410B02 DS_S1T2410B01 S1T2410B02-D0B |
From old datasheet system
bipolar integrated circuit designed as a telephone bell replacement
Low drain current,Adjustable 2-frequency tone,Built-in hysteresis
bipolar integrated circuit designed as telephone bell replacement
|
SAMSUNG SEMICONDUCTOR CO. LTD.
SAMSUNG[Samsung semiconductor]
Samsung Electronic
|
| MCP100T-270I_TT MCP100T-300I_TT MCP100T-315I_TT MC |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
CPU / System Supervisors
Microcontroller Supervisory Circuit with Push-Pull Output
|
MICROCHIP[Microchip Technology]
Microchip Technology Inc.
Microchip Technology, Inc.
|
| PBF-1206-22 PBF-1201 PBF-1201-22 PBF-1202-22 PBF-1 |
Equipment Designed to Conform EMI Regulations Such As VCCI/CISPR/FCC/VDE/etc
Equipment Designed to Conform EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc
KPTC 8C 8#20 SKT PLUG
|
http://
LAMBDA[DENSEI-LAMBDA]
|
| GSM14P256KB-I66 GSM14P512KB-I66 |
256KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统56KB二级高速缓冲存储器)
512KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统12KB二级高速缓冲存储器)
|
GSI Technology
|
| 215025 215.500XE 0215002.H- 215002.XE 0215002.H-ND |
5 x 20 mm Time Lag Fuse (Slo-Blo Fuse)
Axial Lead and Cartridge Fuses - Designed to IEC Standard
Axial Lead and Cartridge Fuses - Designed to IEC Standard
|
Littelfuse, Inc.
|
| SF2039B-2 |
Designed for SDARS IF Receiver
|
RF Monolithics, Inc
|
| SMJE-3V12W1P3 |
Acrich 2 series designed for...
|
List of Unclassifed Manufacturers
|
| SF2143A |
Designed for SDARS IF Receiver
|
RF Monolithics, Inc
|
| 7344-B2T3-AMQB 7344/B2T3-AMQB |
Specially designed for applications
|
Everlight Electronics Co., Ltd
|
